tooldaddy2
Can someone direct me to a site that show/tells me how to work on the water pump on a Excell 2400 psi pressure washer....can get no pressure out of pump....Any ideas ????Thanks in advance
Answer
Like Moto Man said it has to prime but it will not disconnect the water hose there is a filter in there that will plug and no water can get into the pump
Like Moto Man said it has to prime but it will not disconnect the water hose there is a filter in there that will plug and no water can get into the pump
gas power wont shoot out high pressure water?
spampinato
karcher 2400 psi power washer sat in storsge for 2 years runs fine but i had to put a new wand on first start i had pressure let go then no pressure now look at owners manual said to purge for air so i did and nothing i have no leaks or blockages pump seems alright any help would be great thanks
Answer
This is one you can fix yourself and pretty fast. The relief valve is stuck in the open position. Remove it clean it of grease it up put it back in and you are away. This is a very common problem with all household type pressure washers. I have three and have to grease up at least two of them after sitting in the garage over winter.
This is one you can fix yourself and pretty fast. The relief valve is stuck in the open position. Remove it clean it of grease it up put it back in and you are away. This is a very common problem with all household type pressure washers. I have three and have to grease up at least two of them after sitting in the garage over winter.
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar