Tampilkan postingan dengan label pressure washer equipment. Tampilkan semua postingan
Tampilkan postingan dengan label pressure washer equipment. Tampilkan semua postingan

Selasa, 11 Februari 2014

Where can I find a local commercial equipment company selling Pressure Washer in New York or New Jersey?




Luis J


I need to buy a belt-drive pressure washer, around 3,500~4,000 psi. Home depot doesn't have any kind of that machine. Ebay has some, buy I don't want to do shipping and i'd like to buy them in person. Anyone knows if there is any local commercial equipment company selling that kind of pressure washer in New York or New Jersey?


Answer
Have you ever heard of the make Kranzle thay have distributers all over the world and i know of a couple in the states. we are Kranzle dealers in the UK. They are very reliable and powerful pressure washers. They do not work on a belt drive system pureley becasue they are slightly un reliable. If you google or yahoo kranzle you should be able to find a dealer in your local are.

What cleaning situations would you use a pressure washer?




kfount400





Answer
A pressure washer has different settings on it. You use the light setting for windows, medium setting for siding, vehicles, boats, and play equipment. The heavy setting is for brick, mortar, concrete, and other hard,non-forgiving surfaces that you aren't worried about peeling paint or getting banged up by the force of the water.




Powered by Yahoo! Answers

Jumat, 10 Januari 2014

How do you repaint a peeling deck?

pressure washer equipment on Electric Pressure Washer - Cam Spray - 1000WM - UnoClean.com - Jan/San ...
pressure washer equipment image



brizkin1


I have a pressure treated deck that hasn't been painted for about 5 years. the paint is all peeling off in some places but the wood is in decent condition. I would like to know what I have to do remove the peeled paint and how to repaint. Do I need any special equipment (pressure washer/ paint sprayer) and do I need a primer since the deck doesn't have one?


Answer
Use a wire brush to remove as much of the loose paint as you can. I would then suggest an orbital sander with about 60 or 80 grit sand paper to remove the rest. A stripper would be too messy. But, sand paper with this big a grit should be able to remove the remaining paint with minimal clogging. When the paint is gone, switch to a 150 to 220 grit paper for final sanding. If you have a pressure washer, you can use it to clean the surface of sawdust before painting. Then put on a wood primer and paint away.

What PSI to pressure wash red brick patio?




greglovern


We have a patio made from standard red bricks. Over the years it has become very dirty and doesn't come clean by squirting water on it from the garden hose.

I'm considering buying an inexpensive pressure washer. What PSI would I need for this job?



Answer
Another option would be to hire a mobile pressure washing company to clean it for you. Professionals should have years of experience and top of the line equipment that can get the job right in a fraction of the time it would take you. Our machines are big industrial units that use up to 300°F HOT water and steam at 3500 psi to clean grime, grease, spills, dirt, etc. from just about any surface. Cold water machines force you to use higher pressure and get closer with the wand, which can result in pitting out your bricks and leaving wand marks or "snail trails" if you use a 0° tip.

If you decide to go this route, get a couple estimates from a few local pressure washers and make sure they are going to use heat and have years of experience. The cost is probably worth it to save you the time and energy of buying/renting and then doing the job yourself. Most companies would probably give you a discounted rate if you agree to have it cleaned monthly, quarterly, or annually.

You can check out our operation as an example of what to look for at http://www.acmepowerwash.com.




Powered by Yahoo! Answers

Kamis, 19 Desember 2013

How much work is involved in refinishing a deck?

pressure washer equipment on Pressure Washing Services
pressure washer equipment image



LittleFree


My mom's deck is old but sturdy (she's renting too)... but I'd like to refinish the deck in exchange for their rent remaining the same for two years....

Before I open my mouth... just how much work am I looking at and where can I rent equipment???...

This is what I found on the internet.... didn't look impossible.

Refinish a deck:

1. Use a hammer to refasten protruding nails.
2. Trim raised edges with a sandpaper block, electric sander, or plane.
3. As needed, clean gray or dirty wood with a solution of 1 cup bleach in a gallon of water. Apply with a brush or broom.
4. Use a pressure washer to clean the deck, being careful not to damage the wood with excessive pressure.
5. Apply stain or wood preservative following the manufacturer's instructions.
6. Apply wood sealer following manufacturer's instructions.



Answer
In my work a large part of what I do is deck work. Certainly the most economical thing to do is rent a pressure washer and use it to bring back the deck to as close to orig. as possible. If in fact the wood was treated and isn't in bad shape, you might remove all the SILVER and find the deck looks pretty decent. Then seal it after it drys.

I choose NOT to use nails, and when replacing any popped up, I PULL them and use galvanized Deck screws.

Raised edges: Crazing/cupping/ cracking/crowning/warping in general, are usually things I replace. At the very least you might attempt removal of a piece and turn it over, judging the side that was down, and possibly OK in that any cup or crown might be acceptable on the flip side. I still suggest replace.

The balance of your list is fine, and it may be you don't need the bleach solution with a decent pressure wash. I choose NO chemicals, most especially because of safety issues and the damage to plant life. A nicely cleaned bleached deck might be great but the grass and other foliage on the surrounding property, might suffer.

Steven Wolf
AKA "The Deck Doc"

How do you repaint a peeling deck?




brizkin1


I have a pressure treated deck that hasn't been painted for about 5 years. the paint is all peeling off in some places but the wood is in decent condition. I would like to know what I have to do remove the peeled paint and how to repaint. Do I need any special equipment (pressure washer/ paint sprayer) and do I need a primer since the deck doesn't have one?


Answer
Use a wire brush to remove as much of the loose paint as you can. I would then suggest an orbital sander with about 60 or 80 grit sand paper to remove the rest. A stripper would be too messy. But, sand paper with this big a grit should be able to remove the remaining paint with minimal clogging. When the paint is gone, switch to a 150 to 220 grit paper for final sanding. If you have a pressure washer, you can use it to clean the surface of sawdust before painting. Then put on a wood primer and paint away.




Powered by Yahoo! Answers

Rabu, 25 September 2013

Where can I find a local commercial equipment company selling Pressure Washer in New York or New Jersey?

pressure washer equipment on 200' pressure washer hose reel~5000PSI 3/8
pressure washer equipment image



Luis J


I need to buy a belt-drive pressure washer, around 3,500~4,000 psi. Home depot doesn't have any kind of that machine. Ebay has some, buy I don't want to do shipping and i'd like to buy them in person. Anyone knows if there is any local commercial equipment company selling that kind of pressure washer in New York or New Jersey?


Answer
Have you ever heard of the make Kranzle thay have distributers all over the world and i know of a couple in the states. we are Kranzle dealers in the UK. They are very reliable and powerful pressure washers. They do not work on a belt drive system pureley becasue they are slightly un reliable. If you google or yahoo kranzle you should be able to find a dealer in your local are.

Which pressure washer should I buy to use around the yard?




sirdufus69


I've looked at a few websites and see that I can get gas powered washers for upwards of $400 and also get small electric ones for as low as $80. I understand that the big difference seems to be the pressure that each puts out (PSI) but that's all I understand.

Can I get a compressor so I can say attach a paint sprayer, a tire inflator and then attach a head so I can pressure wash? Or do I have to get a compressor for paint and air and then a pressure washer as well? I'm mostly interested in the washing part but would be nice to have an all in one solution if that is even available?

Here is what I want to do...wash the cars, RV, kids bikes, driveway, vinyl siding on the house and basic yardwork type of chores.

Please help me figure out what to buy?



Answer
If it were me... I'd go to the local rental equipment shop and ask the guy in charge of what he thinks. Why - because he would be the one very familiar with what you'd be looking for. As that's what he rents, and is very knowledgeable about.




Powered by Yahoo! Answers