can you change a pressure washer into a sewer jetta?

LARRY

Answer
Yes, just install the kits to convert them into sewer jetter.Set up your pressure washer outside to get started. Attach your pressure washer hose to your pressure washer and run this hose to the inside or outside drain you want to clean. Remove your gun/wand and attach the provided ball valve, jumper hose and hose reel. Install the provided jetter hose onto the hose reel and attach the desired nozzle for the job at hand.

How can i tell what pressure my pressure washer is at?

N/A

I have a 3800 psi dewalt pressure washer and im wanting to turn it down to about 3000-3300 psi but im not sure to tell what psi im at while turning the pressure down.
If anyone could help me out id appreciate it!
Thanks!

Answer
What you would have to do is connect a pressure gauge between the end of the hose and the gun. Run the pressure washer with the gun's trigger pressed so there's water flow and check the pressure it is shooting water. To adjust it to the pressure you want you can either use the unloader to regulate pressure or adjust the engine's rotation which would also regulate pressure.
If you need a gauge here is the link to a 5000 psi one. There are more on the website in case you think this one is too much.
http://www.roncoshop.com/GAUGE_KIT_5000_PSI_85305001_p/85305001.htm

Powered by Yahoo! Answers

can you change a pressure washer into a sewer jetta?

LARRY

Answer
Yes, just install the kits to convert them into sewer jetter.Set up your pressure washer outside to get started. Attach your pressure washer hose to your pressure washer and run this hose to the inside or outside drain you want to clean. Remove your gun/wand and attach the provided ball valve, jumper hose and hose reel. Install the provided jetter hose onto the hose reel and attach the desired nozzle for the job at hand.

How can i tell what pressure my pressure washer is at?

N/A

I have a 3800 psi dewalt pressure washer and im wanting to turn it down to about 3000-3300 psi but im not sure to tell what psi im at while turning the pressure down.
If anyone could help me out id appreciate it!
Thanks!

Answer
What you would have to do is connect a pressure gauge between the end of the hose and the gun. Run the pressure washer with the gun's trigger pressed so there's water flow and check the pressure it is shooting water. To adjust it to the pressure you want you can either use the unloader to regulate pressure or adjust the engine's rotation which would also regulate pressure.
If you need a gauge here is the link to a 5000 psi one. There are more on the website in case you think this one is too much.
http://www.roncoshop.com/GAUGE_KIT_5000_PSI_85305001_p/85305001.htm

Powered by Yahoo! Answers

Troy-bilt pressure washer repair question?

Brad25

The washer will not run when the water is hook up. If i disconnect the water than it will startup just fine. You can feel the binding when the water is on and hooked up when you pull start it. So given that the pump is bad. What is bad on the pump? Is the repair kits a good idea or just buying the new universals pump for 100 bucks? Any advice or experience would be appreicated.

Answer
when the water is connected to the washer try pulling the trigger on the gun without the washer turned on if water comes out keep the trigger held for a few moments to prime the washer then try turning it back on. if no water comes out of it at all even when turned off then it sounds like there is a blockage some where check if there are any filters in the pressure washer they are usually behind where u plug the hose pipe into. try screwing it off and giving it a rinse.

Also pressure washers should never be used without water connected to them as this can damage the compressor pump very easily

Will a 1750PSI attachment fit in an 1800PSI Pressure Washer?

heheman140

I just purchased used 1800 PSI pressure washer but I did not come with a variable lance, or a turbo lance. After doing some research I found a kit (in my price) which includes both the attachments and also comes with a new gun and a hose. But the only problem is that the max pressure is 1750 PSI for this kit. I was wondering if this kit will work with my 1800PSI pressure washer. I have attached a link below for the website.

http://www.pwmall.com/website/Nproductdetail.aspx?ITEMNMBR=OAK-KIT-2&BCATCHILDID2=1&ID=123464

Also if anyone knows any websites where I would be able to purchase similar attachments for the pressure washer, please post it.

Thanks
Thanks a lot fred k. Yes i am looking for a US supplier.

Answer
There is not a problem with the small pressure difference.
Pressure washers are advertised with a Maxiumum pressure rating but that only really applies to the best possible operating conditions.
As soon as the jet leaves the lance, the effective pressure is reduced. At the tip the pressure is enough to cut through soft materials but 5m away you will just get wet.
The only proviso is making sure the accessories fit the gun, but as you have chosen a complete kit there should not be any problem.

As the link is in $US, do you want a US supplier?

Powered by Yahoo! Answers

what to do with all my tool's, i have a lot of tools and want to make some money using them ?

pressure washer gun kit image

Fox F

I had an obsession with tools growing up and now i have like 30 k in tools and want to use them to make money, but don't know how to get started this is what i have.

6000-psi pressure washer
3800-watt generator
Tree chipper
Table saw with dado
Miter saw
Router with almost every tip out there
Router table
1000 set ratchet set
Wire feed welder
mig welder
Setaline torch
Plasma cuter
Pipe benders
3 drills
Handsaws
Drill press
Spray guns
Almost every hand tool out there like wire cutters and drivers
19 high power cords
8 hooligan lights
3 led tripod lights
80 gal air compressor
30 set air compressor tool kit
40 set power tool set
All of these tools are in my garage and I donât get to use them as much
As I want to, and I donât make money from them I also know how to use all of them and they are not brands that are cheep I have craftsmen to Makita, snap on and dwelt I'm broke and want to make some money
But donât really know were to get started, I have worked in carpentry, construction and automobile fields if that helps on any thing. Can any one give me an idea?

Answer
It seems to me that you've spent a hell of a lot of money on this stuff. Presumably, it's taken at least a year or 2 to accumulate everything. So my guess is if you haven't had any "revelations" after all this time, your best bet would be to sell it to someone who can put it to good use and invest the money in the stock market. It'll be rebounding any day now and you' could make a fortune without leaving your computer desk.
If you're really determined to be self-employed and don't have a preference for what you do then choose something that requires the most expensive equipment, because you'll have less competition. The less competition you have, the easier it is to demand higher prices for what you do.Good luck.

Troy-bilt pressure washer repair question?

Brad25

The washer will not run when the water is hook up. If i disconnect the water than it will startup just fine. You can feel the binding when the water is on and hooked up when you pull start it. So given that the pump is bad. What is bad on the pump? Is the repair kits a good idea or just buying the new universals pump for 100 bucks? Any advice or experience would be appreicated.

Answer
when the water is connected to the washer try pulling the trigger on the gun without the washer turned on if water comes out keep the trigger held for a few moments to prime the washer then try turning it back on. if no water comes out of it at all even when turned off then it sounds like there is a blockage some where check if there are any filters in the pressure washer they are usually behind where u plug the hose pipe into. try screwing it off and giving it a rinse.

Also pressure washers should never be used without water connected to them as this can damage the compressor pump very easily

Powered by Yahoo! Answers