Tampilkan postingan dengan label pressure washer maintenance. Tampilkan semua postingan
Tampilkan postingan dengan label pressure washer maintenance. Tampilkan semua postingan

Senin, 16 Desember 2013

What PRESSURE WASHER should I buy?

pressure washer maintenance on Pressure Washer Repair | Tool Repair for Medford, OR
pressure washer maintenance image



jerseymom


Looking to purchase a gas pressure washer. Don't want to spend more than I have to. Traditional residential cleaning, siding kid toys, patio furniture, etc. I was looking at a 2600 but recently heard I need a 3000??? Any thoughts? Any specific models you like?? Thanks!!
it will be used frequently and those crummy 1500's don't do anything for siding. i know i need gas i'm just not sure if the 2600 is enough or if i should go for the 3000



Answer
A 2600psi or a 3000psi gas pressure washer can do some pretty serious damages but it doesn't mean you couldn't use those units for your applications. Many gas powered pressure washers will allow you to adjust the power level. You could use those pressure washers to wash your car and windows or strip paint off your old wooden fence. High power pressure washers will be A LOT more versatile than those underpowered 1500psi or 1800psi ones.

Honda is famous for their small gasoline engines. Like their cars and lawnmowers, their gas pressure washers also live up to this reputation. They are easy to start. They are easy on gas. And they will last for who knows how long with just regular maintenance. A 2600psi pressure washer is capable of making dents (with the "right" nozzle) on your stucco (or even your drive way) already and it will be good enough for residential cleaning. But since power levels could be adjusted, it won't hurt if you get yourself a bigger unit (if you think extra power is worth the cost). Our local Costco stores sells Honda pressure washers for under $500. Maybe you should check yours too. :)

PS: Be careful with those pressure washers. Always check the power setting before each use. I used the washer to wash my lawn chairs once. I didn't know the washer was set on full power and the jet stream cut the fabric on one of the chairs right open. There's another time when I used pressure washer to wash my motorcycle. Once again, I forgot to check the power setting and the first blast cut the saddle (seat) right open. After that incident, I ALWAY check the settings. LOL

PPS: Don't be tempted to test how powerful the jet stream is with your hand. Many high pressure washers are very capable of giving you very nasty cuts.

is a 2000 psi electric pressure washer good enough to clean siding and wood deck?







I am looking at purchasing a 2000 psi electric washer and want to know if that will be good for cleaning my wood deck and aluminum siding on my house? i also would use it for other smaller misc. cleanings.


Answer
the 2000 psi washer may cause a bit of damage if used too close to the wooden deck, but if used wisely and not on a too long deck it will be effective. If you take the nozzle too close you might see splinters especially if the wood is not very well seasoned. For a siding this will only be effective if the siding is small and neither very wide nor very long.
Best to use an adjustable washer where you can adjust the pressure and then buy something in the range of 3500 to 4000 psi maximum power. Depends on your budget!
To have a little extra power will help you use the washer for long time and will somehow minimize the maintenance.
Best of Luck!




Powered by Yahoo! Answers

Selasa, 01 Oktober 2013

How do you wash your car engine?

pressure washer maintenance on Pressure Washer Repair | Parts for Pressure Washer
pressure washer maintenance image



Matt


I'm curious to how you guys wash your vehicles engine? I just open the hood and go at it with a pressure washer, if you have a more efficient way please share it with me. Thanks.


Answer
i will give you some tips on how to clean your engine, the cleanness and safer way to do it.
1. cover the parts that are not to be wet, such as spark plugs, alternator, starter and fuses. You can use cloth first then cover it with plastic to make it sure.
2. clean it with kerosine first, you might use a paint brush to clean inner parts of the engine. You can use in engine degreaser if you want instead of kerosine to remove oil and dirt in your engine.
3. Then spray it off with high pressure water to remove the dirt. You can use detergent soap to clean it more especially the part that kerosine and degreaser does not remove.
4. you can dry it with cloth and spray with high pressure air to remove and dry excess water.
5. You can use wax under the hood and armorall to all black part of your engine.
cleaning your engine is one way of maintenance, you can do this as often as you want or feels like doing it. I suggest you can regularly clean your engine as often as you clean the exterior of your car. Hope this help!

anyone have any tips on getting a neglected hot tub back in working condition?




Ember Halo


we just bought a house that had a neglected hot tub on site. the water was filthy & ants took up residence. we've drained it, and cleaned it (pressure washer). what else do we need to do? do we need to get a hot tub place to come out & clean the pump & lines (it hadn't been run dirty)? what chemicals do we need & how do we use them? do we go to a hot tub / spa dealer to get answers & other services? or do they not do that?

thanks !!



Answer
Check the filters to make sure they don't need to be replaced. Decide on the chemical system you want to use. I use Bacqua Spa in mine because of skin conditions, but there are chlorine and bromide chemicals that you can use, too. Fill the spa and test the water which will tell you what the water needs. Capture a sample of the water and take it to the spa dealer who will assit you in purchasing the correct combination of chemicals. Each spa manufacturer makes their spas different, on ours we add the chemicals, allow it to circulate through the system for a certain length of time to clean the jets and feeds before we can use it. Ask the spa dealer to help you determine the model of spa that you have. Most of the time you can download a manual which is an absolute "must have" for trouble shooting, maintenance and care of your spa.




Powered by Yahoo! Answers

Minggu, 18 Agustus 2013

pump on pressure washer seizes up?

pressure washer maintenance on Pressure Washer Pump Repair | Pressure Washer Suppliers
pressure washer maintenance image



Cheryl


I run the water through the pressure washer.
I fire up the pressure washer.
I pull the trigger and the pressure washer dies.
I cannot pull the cord again until I release the water pressure in the pump, and no water flows through the hose after the engine dies.
I drained the fuel and restarted. I tried to pull the trigger and gave it a little bump--on and off. The motor stayed running, but the water quit flowing. Is there some sort of a valve in the pump that I need to do something to?



Answer
How long has it been since you ran the thing? If you have bad gas or a clogged fuel line, the unit will start and even run after a fashion. But the moment you load the engine (engage the pump), it will die. Before you look to anything else, drain out the old gas, clear the fuel line, check the carburetor and make sure everything is clean - then add fresh *stabilized* gas and try again.This is such a common problem with small engines - mowers and washers in the spring, and snow and leaf blowers in the fall and winter that have not been stored properly that I expect many dozens of such questions over the next few weeks.

If this doesn't work, then look into the pump itself - but as it is building pressure, I am inclined to think that the engine is running lean or fouled and so cannot take the load.

Simply putting in fresh fuel may not be enough if the carburetor is fouled or the fuel-line partially blocked. You could run some carburetor cleaner through the system and there are fuel-additives that perform the same function - but the former requires some small-engine skills, the latter a lot of time - you may have to run several tanks through the system to clean the jets properly.

But, also read the directions that came with it for pump maintenance and sequence-of-operations. It may be as simple as an adjustment of the pressure switch.

How do you wash your car engine?




Matt


I'm curious to how you guys wash your vehicles engine? I just open the hood and go at it with a pressure washer, if you have a more efficient way please share it with me. Thanks.


Answer
i will give you some tips on how to clean your engine, the cleanness and safer way to do it.
1. cover the parts that are not to be wet, such as spark plugs, alternator, starter and fuses. You can use cloth first then cover it with plastic to make it sure.
2. clean it with kerosine first, you might use a paint brush to clean inner parts of the engine. You can use in engine degreaser if you want instead of kerosine to remove oil and dirt in your engine.
3. Then spray it off with high pressure water to remove the dirt. You can use detergent soap to clean it more especially the part that kerosine and degreaser does not remove.
4. you can dry it with cloth and spray with high pressure air to remove and dry excess water.
5. You can use wax under the hood and armorall to all black part of your engine.
cleaning your engine is one way of maintenance, you can do this as often as you want or feels like doing it. I suggest you can regularly clean your engine as often as you clean the exterior of your car. Hope this help!




Powered by Yahoo! Answers