How can you adjust the PSI from a pressure washer?

Freedom

Hello,

I am looking into purchasing a pressure washer for various uses, they are pretty affordable from what I can tell, however for a few applications I need a level of pressure around 1200, no higher. If I use any higher there may be damage done by the water. Is it possible a pressure wand can have an adjustable max pressure? Or perhaps just being careful enough to keep the nozzle far away enough?

Many pressure washers seem to be in the 1500-2000 PSI range.

Thank you.

Answer
My parents craftsmen pressure washer has a 2400psi max pressure. However the wand is adjustable so the spray can be more or less concentrated depending on what you need. Also the engine has a throttle control. "Turtle" speed makes a good bit less pressure than "rabbit" speed. Also the water loses pressure very fast once it exits the wand so just holding it back a bit will be enough. Hope this helped.

What psi pressure washer for exterior paint prep?

Brian

Im going to be repainting the exterior of my house soon and i need to get a pressure washer to clean and remove loose paint. I know i need to get a gas one because electric wont cut it. What psi will be enough to get the job done? I found a decent deal on craigslist for a 2600 psi pressure washer but is that enough for what i want to do or should i be looking into buying or renting a 3000 plus psi?

Answer
Any pressure washer will do the job...even the electric ones. The higher pressure will remove the paint quicker but will increase the possibility of damage to the surface. There is a definite technique to using pressure washers for removing paint. You need to be aware of the damage you could do before you start. Make sure you read and understand ALL instructions before you start and practice on a piece of old scrap before you start on the house. Kick back from the nozzle could be a real surprise when you are on the top of a ladder.

Powered by Yahoo! Answers

How do I fix the hose tail on a Craftsman Pressure washer?

pressure washer psi image

Mike R

I have a Craftsman 2550 PSI pressure washer. I need to replace the "hose tail kit". This is the part that you attach the suction hose to for the detergent. My problem is upon receiving the replacement part I have found that I don't know what order to assemble the parts. There is a new "valve" but it came with a small spring, metal ball, and a washer. Does anyone know in what order these parts go?

Answer
You should be able to download a diagram from craftsman.com and see for sure how to assemble.

If I have to guess it sounds like you should the valve should go on the outside followed by the washer, ball, and spring. It is essentially creating a check valve inline so that it can only suck up the detergent and it won't put water back into that bucket.

Can I use my pressure washer to remove paint from concrete porch steps?

Mick_man

Craftsman 2550 psi pressure washer - 6.5 HP.
Nozzle is adjustable - High Pressure or Low Pressure plus
Stream or Fan.

There are two coats of paint on the concrete.
Latex - Light Brown paint with Green (unknown paint type) underneath.

I have accidentally removed paint on otyher materials but never tried intentionally removing all paint from a concrete surface. Can I do this? Should I use some sort of solvent/cleaner in conjunction with the washer?

Thanks!

Answer
That thing will almost blast anything off,try it most likely it will work,my neighbor just used one around his house and it took of old grass carpet that they use to put on outside steps.So try it you have nothing to lose except your paint lol You can also try a hard wire brush to help the process. By the way 2550 psi is alot so id say you have a good chance at it.

Powered by Yahoo! Answers