Tampilkan postingan dengan label pressure washer spray tips. Tampilkan semua postingan
Tampilkan postingan dengan label pressure washer spray tips. Tampilkan semua postingan

Minggu, 29 Desember 2013

How do you wash your car engine?

pressure washer spray tips on BE Pressure Supply PE-4013HWPSCOMZ Gas Powered Pressure Washers at ...
pressure washer spray tips image



Matt


I'm curious to how you guys wash your vehicles engine? I just open the hood and go at it with a pressure washer, if you have a more efficient way please share it with me. Thanks.


Answer
i will give you some tips on how to clean your engine, the cleanness and safer way to do it.
1. cover the parts that are not to be wet, such as spark plugs, alternator, starter and fuses. You can use cloth first then cover it with plastic to make it sure.
2. clean it with kerosine first, you might use a paint brush to clean inner parts of the engine. You can use in engine degreaser if you want instead of kerosine to remove oil and dirt in your engine.
3. Then spray it off with high pressure water to remove the dirt. You can use detergent soap to clean it more especially the part that kerosine and degreaser does not remove.
4. you can dry it with cloth and spray with high pressure air to remove and dry excess water.
5. You can use wax under the hood and armorall to all black part of your engine.
cleaning your engine is one way of maintenance, you can do this as often as you want or feels like doing it. I suggest you can regularly clean your engine as often as you clean the exterior of your car. Hope this help!

should pressure washer have much pressure when quick disconnect is not on wand?




mowerman


do the tips increase pressure or is all from the pump?


Answer
It has full pressure. The tip allows whatever product you are spraying to flow, thus "using" pressure and decreasing it until the pump can rebuild it. The tip merely allows different patterns of spray.




Powered by Yahoo! Answers

Minggu, 29 September 2013

should pressure washer have much pressure when quick disconnect is not on wand?

pressure washer spray tips on Pressure Washer Spray Nozzle Tip 1/4 Size 4.0, 2500 Psi to 3500 Psi
pressure washer spray tips image



mowerman


do the tips increase pressure or is all from the pump?


Answer
It has full pressure. The tip allows whatever product you are spraying to flow, thus "using" pressure and decreasing it until the pump can rebuild it. The tip merely allows different patterns of spray.

How can I remove spray paint from my drive way?




da_panther


Woke up this morning to a nice vandalism of my driveway, and some not so nice things written on it. What is the best way to get rid of it? Lowe's recommended some chemical stuff, can't remember then name, and pressure washing it. It got the first "layer" off, but you can still see the words. Any advice?


Answer
I think most likely Lowes would have recommended is MURATIC ACID but (i) you will probably have to find it at ACE HARDWARE, a Mom & Pop Hardware or a local paint store like Duron. Also I would recommend you research and be extra careful when using Muratic Acid to protect your hands with heavy duty gloves (that you might need to toss if the acid were to damage), eye protection from goggles or safety googles as well as wearing old clothes. If that doesn't work, I would personally recommend you renting a commerical grade gasoline powered pressure washer (again you might try Duron or paint stores) that professional painters get all their supplies and paints from bec the pressure is so POWERFUL if not used carefully moving the tip side-to-side, it can rip the surface just like a sandblaster esp on paint. Believe me I once let my 11 year old son handle it on our asphalt driveway to remove grease and guess what? After it dried, you could see how the stroke marks but luckily once we painted the asphalt with coal based sealer over the entire driveway it covered the blemish from the pressure washer being so powerful. Good Luck!




Powered by Yahoo! Answers

Selasa, 10 September 2013

Is it okay to use bleach in a pressure washer?

pressure washer spray tips on 40 Degree Flat Tip Spray Nozzles
pressure washer spray tips image



mmiller751


I'm going to pressure wash my house before painting it. Someone told me not to run bleach through my pressure washer. I'm thinking of using a deck sprayer to spray on the bleach/water mixture to clean the exterior of the house if it's not a good idea to run the bleach through the pressure washer. What say you?


Answer
I am a 37 year experienced painter and pressure wash every exterior I do.. I also repair airless sprayers,pressure washers,compressors etcetera...A pressure washer has a solvent tube on it for mixing/applying your cleaning agents or they simply have the black tip to attach that is a solvent tip..or the cheaper ones have a twisting adjusting nozzle on them that when in the fullest open mode applies the solvents...I have ALWAYS used bleach in my pressure washers for over 25 years and it does no harm at all..if the washer has the soolvent tube on it simply put it in the bottle of bleach and when you attach the black tip on the wand it will dispense it accordingly...when you change the tip after bleaching to a washing tip..it will stop dispensing it..I actually use the 12%m chlorine I buy from a swimming pool place in mine and not the 5% in common stores...This is over twice the strength of common bleach, and it has not harmed a pressure washer as of yet...The important part is flushing the washer out and dispensing tube of the bleach after using..IT WILL NOT HARM THE PRESSURE WASHER...

What can I do with my pressure washer?




souldoubt


I rented a 4000 psi pressure washer to strip all of the old peeling paint on my deck. Is this too much pressure to clean my aluminum siding as well? I'd assume windows will be out of the question?
Also, does anyone have any good tips since it came with no manual?
I have enough common sense not to spray anybody with it! :)
Thanks for your help!!



Answer
Pressure washers usually have like 3-4 different heads with different spray patterns. if you do not have different heads just change your distance to the object to change the pressure hitting the object. Windows are ok but might leak a little while doing it, siding is ok, make shure when you do your deck you do not start to eat into the wood




Powered by Yahoo! Answers