How can I remove marks from a composite deck from pressure washing too close?

pressure washer gun image

kbc..loves

I used a pressure washer on our back deck and got to close when doing some furniture and the steps and removed to color and left marks all over the deck. Any idea how to fix it? Would bleach work?

Answer
NO to the wire brush ... don't ad a metal to start a reaction on the deck.

give it time in the sun. if you bleach it its going to fade a lot.

you can use a deck cleaner. that will also fade the deck some. We have use a heat gun to get scratches out with very good results. We were shown that technique at a trex factory.
Be careful stay back to not burn the deck.

Last idea you could also through a big party and let every walk on it.

http://milesbradley.com/

for air compressor tools. when do I really need more than 90psi?

Famous cel

tools that I would likely use. brad, finish, framing nailer. pressure washer, paint spray gun, dusting. inflating tires.

do i need to buy an air compressor more than 100psi? or is 115 recommended.

Answer
The problem is volume of air. A compressor that is 150psi and a 5 gallon resovour has 7.5 gallons of useable psi at 100psi. Get the math? If your using a framing nailer is using .1cuft per shot at 100psi and you have a compressor with 5 gallons at 100psi your going to be turning on your compressor pump every 10th shot. those factors get worse the more use you have. An air rachet uses a lot more volume, a paint sprayer even more. If you use a air sander you use a lot too.

Powered by Yahoo! Answers