Karcher pressure washer gas engine won't start?

pressure washer 2600 psi honda image

Walter H

I bought a 2600 PSI Karcher pressure washer with a Honda 160cc engine at Sam's Club at 15% off the list price. It was a display model, but the spark plug was dirty, so maybe someone returned it after using it. I am getting a spark to appear by holding it disconnected next to the engine.
I added new fuel, changed the spark plug, check the lines for blockage, but it won't start. I squirted gas into the cylinder through the spark plug hole and it started for a few seconds. However, it won't stay running.
Is there anything else I should try before returning it?
I followed the directions, in that I did check to make sure that the oil was full, the choke was in the start position and the fuel line was set in the open position, and fuel was reaching the carburetor (by taking off the fuel line and letting it run). I took off the spray nozzle and water was running freely. Previously, I tried starting it with the trigger depressed too.

Answer
It sounds like the needle valve in the carburetor is clogged. Clean the carb and it should run.

Pressure Washers: HONDA vs. BRIGGS & STRATTON engine?

Orion

I am considering buying a pressure washer.
My uses: cars, decks, siding, and concrete/brick walkways.
Honda engine: 160 cc, 2600 max psi, 2.3 max gpm. ($339)
VS.
Briggs & Stratton engine: 175 cc, 2700 max psi, 2.3 max gpm. ($299)

As you can see, my dilema is trying to justify paying for a more expensive Honda engine that has less power ratings.

Which should I buy? and most importantly...why?

Answer
I have a Honda pressure washer,it has been in regular use for several years,without any trouble.

Powered by Yahoo! Answers