pressure washer brands image
^glen^magn
Pressure washer gone bad. Repair business stated this type of pump is not rebuildable. So I am looking for a new pressure washer but want to make sure the pump is serviceable.
How do you tell?
What do you look for?
Answer
Call the guy back and ask which brands he would recommend
When buying mine all the research I did (google) said to stay away from aluminum pumps, I opted for a Generac pressure washer with a brass pump, also they need to be winterized or kept where it won't freeze during the winter months.
Call the guy back and ask which brands he would recommend
When buying mine all the research I did (google) said to stay away from aluminum pumps, I opted for a Generac pressure washer with a brass pump, also they need to be winterized or kept where it won't freeze during the winter months.
Brand new petrol pressure washer wont start?
Jonathan
I am very familiar with petrol pressure washers and the way they work. My old one failed after 4 year of working all day everyday, so ice bought a new one. Cane today. Won't start up.
I out fresh petrol in, filled the oil to the correct level (so it can't be the low oil cut off not doing it)
I've ran water from the tap through and pulled trigger to release all the air in the new pump. I've got the fuel on and the choke on (all the same routine as I always do)
The kill switch is on the "on" position.
Been pulling the pull start till my hands get blisters and its still not starting. Not even attempting to. Releasing water pressure in the pump of course each time.
I have had alot of petrol pressure washers from new and always been fine and not done anything differently. Please someone help I really need to use it ASAP and can't afford the time required to send it back
Please anyone help????
Answer
Pull the spark plug out and see if it is damp......if so your getting fuel. If not check your fuel lines for blockage. Pull the air cleaner off and make sure the choke is opening and closing. Try using some starting fluid in the event the engine is not priming itself and puling gas into the carb bowl. If these solutions are not correcting the problem you only have may have to cal their customer service to see if they have a local warranty repair shop near you.
Pull the spark plug out and see if it is damp......if so your getting fuel. If not check your fuel lines for blockage. Pull the air cleaner off and make sure the choke is opening and closing. Try using some starting fluid in the event the engine is not priming itself and puling gas into the carb bowl. If these solutions are not correcting the problem you only have may have to cal their customer service to see if they have a local warranty repair shop near you.
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar