Rabu, 18 September 2013

is a 2000 psi electric pressure washer good enough to clean siding and wood deck?

pressure washer 3500 on ... KG3035G1.1 3500 PSI 3.0 GPM Replacement Triplex Pressure Washer Pump
pressure washer 3500 image






I am looking at purchasing a 2000 psi electric washer and want to know if that will be good for cleaning my wood deck and aluminum siding on my house? i also would use it for other smaller misc. cleanings.


Answer
the 2000 psi washer may cause a bit of damage if used too close to the wooden deck, but if used wisely and not on a too long deck it will be effective. If you take the nozzle too close you might see splinters especially if the wood is not very well seasoned. For a siding this will only be effective if the siding is small and neither very wide nor very long.
Best to use an adjustable washer where you can adjust the pressure and then buy something in the range of 3500 to 4000 psi maximum power. Depends on your budget!
To have a little extra power will help you use the washer for long time and will somehow minimize the maintenance.
Best of Luck!

has anyone ever rented a pressure washer? where did you rent one from and about how much did you pay?




Mono


the home i am renting needs a good cleaning! so i was thinking of doing that this weekend. not sure if i should go to Lowe's or home depot..... thanks for your input!
oh yeah how did it work did you just hook it up to a hose? i have well water does that matter?



Answer
Most rental yards have pressure washers. Its been a long time since I rented one. I would expect to pay $40-50/day. It hooks up to a regular garden hose. The only concern is if your well has enough gallons per minute for the washer to work properly. As a painting contractor I pressure wash many houses and decks every year. My big pressure washer is rated for 4 gallons per minute, my smaller one is 2.5 GPM. Before I hook it up I time how long it take the hose to fill a 5 gallon pail. If it takes longer than a minute I know not to use the bigger machine.
I don't recommend the rotating tip for beginners. Its true that it can do the job faster but it can do lots of damage if you are not careful. Sometimes the rotating feature gets stuck and leaves you with a narrow high pressure stream. Play it safe and use a 25 or 40 degree fan tip. Keep the water moving without stopping in one spot. That can cause damage if the water gouges the wood.
Most of the houses I work on have well water. I find about 1 in 10 don't have enough flow to use my 3500 psi, 4 GPM machine. I have only found 1 where I couldn't use my smaller washer.




Powered by Yahoo! Answers

Tidak ada komentar:

Posting Komentar