how to start coleman pressure washer image
thegerbilg
Any help? The pressure wand sprays water out, but water then starts to leak out of the part where the handle connects to the wand shaft. Please help!
And yes, i did go to the website and searches for it, but noting came up.
Answer
I work on pressure washers for a living and see this daily! It's just an "O-Ring" has split and is allowing water to leak out. Find the o-ring that isn't an "O" but more of a "C" and replace it, problem solved! Sears has o-ring kits in the stores with several sizes of o-rings in it. Use the instructions included to select the right ring!
I work on pressure washers for a living and see this daily! It's just an "O-Ring" has split and is allowing water to leak out. Find the o-ring that isn't an "O" but more of a "C" and replace it, problem solved! Sears has o-ring kits in the stores with several sizes of o-rings in it. Use the instructions included to select the right ring!
coleman/powermate pressure washer starts,quites,10-15 attempts then stays running,changed plug & checked carb?
me
Answer
I bet your not depressing the trigger on the gun handle when you start it are you? This makes them hard to start and will also ruin the seals in the pump..you always squeeeze the trigger and let the water flow for at least a minute to get all air out and keep holding the trigger while you start it , or it will start and bog down and die..you will decacipate the pump..IS this what is happening?
I bet your not depressing the trigger on the gun handle when you start it are you? This makes them hard to start and will also ruin the seals in the pump..you always squeeeze the trigger and let the water flow for at least a minute to get all air out and keep holding the trigger while you start it , or it will start and bog down and die..you will decacipate the pump..IS this what is happening?
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar