ACI Constr
It is a troy built honda 2600 psi power washer. It is a friend of mine and he is asking me to fix it. I don't know where to begin. I don't know if he left it running burned it up or what. How do I trouble shoot this problem.
Answer
If the motor runs but pump will not pressure up then the pump is no good.Some are rebuildable but if you need a new pump it will cost as much as a new washer..
If the motor runs but pump will not pressure up then the pump is no good.Some are rebuildable but if you need a new pump it will cost as much as a new washer..
What could be wrong with my pressure washer engine?
MS II
I have a 6 hp, 2600 psi pressure washer with a Honda motor that's about 6 years old. It sat all winter with gas in the tank and carburetor, and when I tried to use it a few weeks ago, it would only run on half-choke. Today, I took the gas tank and carburetor off (and took the carburetor apart), cleaned everything with carburetor cleaner, put everything back together, filled the tank with new gasoline, and changed the oil. After all that, the pressure washer will still only run on half-choke. I'm not a small engine mechanic, so if you are, and you have some suggestions, I'd love to read them and try them out. Thanks. PS. I know it would be easier to take it to a mechanic, but it's so much more fun to try it yourself first.
Answer
Take off exhaust at cylinder head,will it run ok now ,they are prone to a large build up of carbon in exhaust and exhaust port which causes a back pressure preventing it drawing in enough fuel but the half choke cures this .An old head would recognize the soft exhaust note and know what the trouble was,
Take off exhaust at cylinder head,will it run ok now ,they are prone to a large build up of carbon in exhaust and exhaust port which causes a back pressure preventing it drawing in enough fuel but the half choke cures this .An old head would recognize the soft exhaust note and know what the trouble was,
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar