Brian
Im going to be repainting the exterior of my house soon and i need to get a pressure washer to clean and remove loose paint. I know i need to get a gas one because electric wont cut it. What psi will be enough to get the job done? I found a decent deal on craigslist for a 2600 psi pressure washer but is that enough for what i want to do or should i be looking into buying or renting a 3000 plus psi?
Answer
Any pressure washer will do the job...even the electric ones. The higher pressure will remove the paint quicker but will increase the possibility of damage to the surface. There is a definite technique to using pressure washers for removing paint. You need to be aware of the damage you could do before you start. Make sure you read and understand ALL instructions before you start and practice on a piece of old scrap before you start on the house. Kick back from the nozzle could be a real surprise when you are on the top of a ladder.
Any pressure washer will do the job...even the electric ones. The higher pressure will remove the paint quicker but will increase the possibility of damage to the surface. There is a definite technique to using pressure washers for removing paint. You need to be aware of the damage you could do before you start. Make sure you read and understand ALL instructions before you start and practice on a piece of old scrap before you start on the house. Kick back from the nozzle could be a real surprise when you are on the top of a ladder.
they tell me my pressure washer was not flushed out/ cleaned and thats why it wont start, how do i clean it?
tony.perez
Answer
You need to dump the old gas out clean the carb and change the plug if its not locked up take the nozzle off and that way you don't have any pressure on the sistem
You need to dump the old gas out clean the carb and change the plug if its not locked up take the nozzle off and that way you don't have any pressure on the sistem
Powered by Yahoo! Answers
Tidak ada komentar:
Posting Komentar